My Crossword Maker Logo
Powered by BrightSprout
Controls:
SPACEBAR SWITCHES TYPING DIRECTION
Answer Key:
Edit a Copy:
Make Your Own:
Crossword Word Search Worksheet
Rate This Puzzle:
Log in or sign up to rate this puzzle.

Module 1 Trade Terms

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Across
2
The horizontal timber that forms the transition between the foundation and the frame is called the ____.
3
The lowest horizontal member of a wall frame or partition, which rests on the subfloor, is called the ____.
8
The amount of time a structure can withstand fire conditions is represented by a(n) ____.
9
A sloping structural member of a roof frame used to attach sheathing is called a(n) ____.
12
Lumber within a range of 2" to 5" thick and up to 12" wide is classified as ____.
13
A 1 x 4 nailed to ceiling joists to prevent twisting is the ____.
14
The equally spaced framing members that support floors and ceilings are called ____.
15
The chalky rock that serves as the basic ingredient in drywall is ____.
18
Material used to plug holes through the soleplate and top plate and prevent the passage of smoke or fire is called ____.
20
Cutting across the grain of lumber is called ____.
23
The diagonal members installed between joists to provide extra support are called ____.
26
A framed structure that projects out from a sloped roof is a(n) ____.
27
The organization that rates plywood is the ____.
28
The vertical framing member that forms the sides of a rough opening for a window or door is a(n) ____.
29
Panels made from layers of wood strands bonded together are known as ____ (initials).
30
The covering layer of material, such as brick, used as a facing material for a wall is called ____.
31
Lumber with edges that are shaped to overlap adjoining pieces is called ____.
Down
1
A triangular wall enclosed by the sloping ends of a ridged roof is a(n) ____.
2
Panels or boards laid directly on and fastened to the tops of floor joists are known as ____.
3
The sheet material or boards used to close in walls and roofs is known as ____.
4
An L-shaped lumber arrangement used to reinforce ceiling joists is a(n) ____.
5
Cutting with the grain of the lumber is called ____/
6
An engineered assembly that is used in place of stick-built joists and rafters to support floors and roofs is a(n) ____.
7
The uppermost horizontal framing member in a wall or partition frame is the ____.
10
When steel rods are installed in concrete, it is known as ____.
11
A short framing stud installed between the header and top plate or between the sill and soleplate is known as a(n) ____.
16
A length of lumber that is laid horizontally over the top plate of a wall is known as a(n) ____.
17
The material that is installed on top of the subfloor is the ____.
18
Strips of wood or metal applied to a wall to make it level, form an air space, or provide a fastening surface are called ____.
19
Plaster used to coat exterior walls is known as ____.
21
Pieces of lumber or fire-resistant material installed between studs to reduce airflow and stop the passage of fire are called ____.
22
The horizontal member that supports the load over a window or door opening is the ____.
24
The main support beam for a structure is the ____.
25
A device that instantly de-energizes an electrical circuit in the event of a ground fault is a(n) ____.