My Crossword Maker Logo
Powered by BrightSprout
Controls:
SPACEBAR SWITCHES TYPING DIRECTION
Answer Key:
Edit a Copy:
Make Your Own:
Crossword Word Search Worksheet
Rate This Puzzle:
Log in or sign up to rate this puzzle.

Test 3 Review

Name: _________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Across
1
A slot or pocket that does not extend off the work piece is known as this boundary?
3
Use only 70% of the cutter when you are ________.
4
Which value must be used when activating cutter radius offset.
5
Insert geometry that offers a very high insert edge strength.
8
The corresponding arc vectors for X, Y and Z.
11
A type of thread mill.
13
When using G03 the cutting direction of the arc is _______.
14
Excess ______ on the outside contour should be considered when writing a facing pass?
Down
2
When activating cutter radius offset, it's important that the linear move is _______ than the radius of the tool.
3
Used for programming an angle to the cutting path and not the parts contour
6
When using G02 the cutting direction of the arc is _____.
7
G41 and G42 should be activated using what type of movement.
9
Insert geometry that has good chip breaking characteristics.
10
A feature that extends off the work piece is known as this.
12
Always approach the "z" depth position _____ from the part.