A device typically used to hold a wood or metal workpiece, and often used in, but are not limited to, carpentry and welding.
Is a wood working tool used to guide a hand saw to make precise miter cuts in a board.
Provide efficient method of attaching insulation, roofing material, underlayment, ceiling tile, and many other products.
A small woodworking hand plane which typically has the blade bedded at a lower angle than other planes, with the bevel up. It is designed to cut end grain and is typically small enough to be used with one hand.
A saw with a very narrow blade stretched across a U-shaped frame, used for cutting curves in wood. Makes very fine cuts.
Made of fabric or steel, steel commonly found in 6'-30' lengths. 50' or longer are available.
Hardened only around the teeth, usually preferred for use on metals.
A groove cut in the face of a board, into which the edge of another board is fixed.
A type of tool used to drive nails into wood or some other kind of material. It is usually driven by compressed air (pneumatic), electromagnetism, highly flammable gases such as butane or propane, or, for powder-actuated tools, a small explosive charge.
A coarse saw for cutting wood along the grain.
A small, slender hand drill which is operated by pushing it; a spiral ratchet rotates the bit.
Comes in sizes 2',4',6'. A device for determining true horizontal or vertical directions by the centering of a bubble in a slightly curved glass tube or tubes filled with alcohol or ether.
Available in 6" to 12". Used to check squareness of surfaces and edges.
Are ideal for woodworking because the jaws are broad and distribute the pressure over a wide area. Sizes range from 4"-24".
Establishes a vertical line when attached to a line and suspended.
A step-shaped recess cut along the edge or in the face of a piece of wood, typically forming a match to the edge or tongue of another piece.