My Crossword Maker Logo
Powered by BrightSprout
Save Status:
or to save your progress. The page will not refresh.
Controls:
SPACEBAR SWITCHES TYPING DIRECTION
Answer Key:
Edit a Copy:
Make Your Own:
Crossword Word Search Worksheet
Rate This Puzzle:
Log in or sign up to rate this puzzle.

Fall Protection - Subpart M

Chicago Regional Council of CarpentersSafety Program - Safety Challenge
Across
A gap or void 2" or more in a floor, wall, roof or walking surface is a _____
An harness, anchor point and a ________ are the key components of a PFAS
Lanyard attachment point
Workers need to _______ their fall protection equipment before each use
A _________ device system may be used when working on the face of formwork or reinforcing steel
Guardrail component that must support a 150# downward and outward force
These types of lifeline devices limit the fall distance to 2 feet or less
A ________ person, trained in fall hazards, should provide fall protection training to employees
________ shall be provided by the employer for all workers that may be exposed to fall hazards
A deceleration device that travels on a lifeline and automatically, by friction engages the lifeline to stop a fall
The employer shall provide for prompt ______ in the event of a fall
Heights greater than ______ feet require fall protection in construction
Number one cause of fatal construction injuries
Down
A roof having a slope less than or equal to 4 in 12
________ for employees may be necessary when there are changes in site fall hazards and fall protection systems
An unprotected side or edge that continuously changes as other sections of decking or roofing are added
Only ________ type snaphooks shall be used with personal fall arrest systems
Mechanical aid that shall not be used to increase a workers height when installing a ceiling system
Workers shall wear a _______ when exposed to falling objects
Required as part of a guardrail system when people are working below
Guardrails, PFAS and _______ are three forms of fall protection
When stopping a fall, the maximum arresting force on the worker shall not exceed ________ hundred pounds
A ________ must support a 200# downward and outward force
Scaffolds over ____ feet in height require a form of fall protection
The attachment point of a body harness shall be located in the _______ of the wearer's back near shoulder level
Scaffold platforms shall be ______ decked
A Scaffold shall be tied-into a structure or guide wired when the height exceeds the minimum base width ratio by _____ times