My Crossword Maker Logo
Powered by BrightSprout
Save Status:
or to save your progress. The page will not refresh.
Controls:
SPACEBAR SWITCHES TYPING DIRECTION
Answer Key:
Edit a Copy:
Make Your Own:
Crossword Word Search Worksheet
Rate This Puzzle:
Log in or sign up to rate this puzzle.

NEPTUNE

Across
Connect the expiratory limb heated-wire (yellow) pigtail to the ________ heated-wire connector on the heater cable.
B. Place the short-cabled _____ at the column outlet and the long-cabled probe into the inspiratory side of the patient's wye.
Confirm or Change Settings: A. To accept the displayed settings, press and _______ the √ button. The heater will begin Warm Up and then normal operation.
MOVE TEMP GRADIENT ______ FOR LESS MOISTURE.
Place the water reservoir into the ________ holder.
Insert the pin all the way. Repeat this procedure for the ____ puncture pin and puncture site.
Connect the _______tubing elbow to the remaining port on the column.
Connect the Ventilator Circuit to the Concha-Column: A. Remove the _______ cap from the top of the column.
MOVE TEMP GRADIENT _______ FOR MORE MOISTURE.
_______ on the Ventilator or Gas Source.
______the tubing clamp(s) and gently squeeze the reservoir bottle.
Connect the Water Reservoir to the Concha-Column: A. Remove the ____ from the column's bottom puncture pin.
Down
Turn the _______ on.
________ INSPIRATORY TUBING FOR APPROPRIATE CONDENSATION.
Connect the Heated-Wire Pigtails: A. Connect the Inspiratory limb heated-wire (blue) pigtail to the ________ heated-wire connector on the heater cable.
Push and twist the pin through the puncture site at the ______ of the reservoir.
Connect the Dueal Temperature Probe: A. ________ the temperature probe plug into the jack at the lower front of the heater.
Once desired settings are entered, _____ the √ button to accept changes.
Connect the expiratory tubing elbow to the ________port on the ventilator.
Verify that water is _______ in the bottom column tubing.
_____ APPROXIMATELY 20 MINUTES FOR SYSTEM TO EQUILIBRATE.
______the humidifier line from the ventilator to one of the ports on the column.
B. To change the displayed ______, press and hold the √ button until the + or - icons on the display are illuminated.
Install the Concha-Column and Concha Water Reservior: A. Insert the ______into the heater. Be sure that the tubing clamp(s) are closed.
The heater will begin Warm-Up and the ________ operation.