1
Master cylinder seals should be ________ before installation
4
Type of brake bleeder that "sucks".
7
Brake fluid should never be _________.
8
__________ brake bleeding requires a helper
9
Check under the wheel cylinder _______ for a leak that is just beginning
11
The master cylinder changes pedal movement into ________ pressure
14
Aluminum master cylinder bores have a ______ coating
17
Master cylinders have 2 of these
19
Maximum pressure that should be applied to a plastic brake reservoir
21
Type of brake bleeder that supplies the system with fluid
24
Valve that is used as a warning device in split brake systems
25
____________ bleeding a new master cylinder helps remove air from the system when it is replaced
26
Floating calipers apply force to ______ side(s) of the rotor
30
Hydraulic pressure forces the wheel cylinder pistons________.
31
Type of caliper that has 2 or 4 pistons
32
Wheel cylinder cups should face the ______ of the cylinder
35
An aluminum master cylinder bore that is scored should be _________.
36
Type of brake calipers that use a quick take up master cylinder
38
Part of the master cylinder cover that is vented
40
Used to retract caliper pistons when replacing brake pads
41
Modern master cylinder housings are made of ________.
42
The piston on a single piston caliper will always be located ______ of the brake rotor
43
______________ have 2 pistons